R&S®ZNA vector network analyzers

R&S®ZNA vector network analyzers
Open Lightbox
R&S®ZNA vector network analyzers
Open Lightbox
R&S®ZNA vector network analyzers
Open Lightbox
R&S®ZNA Vector Network Analyzers, Front viewR&S®ZNA Vector Network Analyzers, Side viewR&S®ZNA Vector Network Analyzers, Back view

Key facts

  • 10 MHz to 26.5/43.5/50/67 GHz (R&S®ZNA26/43/50/67)
  • Two or four port models available
  • Excellent RF-performance
  • Up to four integrated sources
  • Unique and intuitive touch-only operation
  • R&S®ZNA vector network analyzer EIA 2020 Winner

Masters the most challenging measurement tasks

The R&S®ZNA vector network analyzers are the high-end series of the R&S VNA portfolio: excellent RF-performance is combined with a wide range of software features and a unique hardware concept. The touch-only operation together with the DUT-centric approach makes the R&S®ZNA to a powerful, universal and compact measurement system for characterizing both, passive and active devices.

Features & benefits

Excellent RF-performance

High performance and fast speed for advanced measurement tasks

  • Precise measurements on active and passive components
  • Wide dynamic range to characterize even high-blocking devices under test
  • Excellent stability, low trace noise and outstanding raw system data for high reliability
  • High accuracy suitable also for metrology applications
  • Wide power sweep range

R&S®ZNA43 with four ports and direct channel access
Open Lightbox

R&S®ZNA43 with four ports and direct channel access

Versatile hardware options

Powerful and universal measurement system

  • Optional direct channel access for wide dynamic range, external test setups and system integration
  • Up to four internal phase-coherent sources for high flexibility and short sweep times
  • Up to two internal receiver LOs for fast mixer measurements with low trace noise
  • Up to eight independent receivers for reliable multi-channel phase measurements
  • Up to four internal pulse modulators and pulse generators
  • Optional source and receiver step attenuators for expanding the usable power range

Open Lightbox

Wide range of software options

Challenging measurements configured intuitively

  • Time domain analysis and extended features as eye diagram for signal integrity
  • Scalar mixer measurements and frequency converting measurements
  • Vector mixer measurements for advanced mixer measurements
  • Frequency converting measurements on mixers/converters without LO access
  • Spectrum analysis mode for an extensive analysis of the device under test
  • Real Time Measurement uncertainty calculation plus verification measurement (METAS VNA Tools)

Open Lightbox

Unique operational concept

Intuitive touch-based operation with sophisticated user interface

  • Two independent touchscreens for convenient operation
  • Display of user-selected content (e.g. SCPI commands) on smaller screen possible
  • Efficient operation with muli-touch gestures
  • Free configuration of channels, diagrams with drag-and-drop
  • DUT-centric approach that adapts to the user’s requirements and optimizes the settings
  • Extensive evaluation features for detailed analysis of measurement traces

Open Lightbox

Extension units

Advanced measurement capabilities

Frequency extension up to 1.1 THz with the R&S®ZVA-Z and R&S®ZC converter families.

Open Lightbox

Accessories for a complete solution

Different accessories for calibration, verification and different measurements

  • Mechanical calibration and verification kits
  • Automatic calibration units
  • Inline calibration units for in-situ refresh of calibration data
  • Test cables
  • Torque wrenches
  • Support of R&S®NRP power sensor family

Automatic calibration unit, power sensor and calibation mixer.
Open Lightbox

Automatic calibration unit, power sensor and calibation mixer.

Available models

Available models
Models
Ports
Frequency
Connectors
R&S®ZNA26

R&S®ZNA26

Order number 1332.4500.22

Ports
2 ports
Frequency
10 MHz to 26.5 GHz
Connectors
3.5 mm(m)
R&S®ZNA26

R&S®ZNA26

Order number 1332.4500.24

Ports
4 ports
Frequency
10 MHz to 26.5 GHz
Connectors
3.5 mm(m)
R&S®ZNA43

R&S®ZNA43

Order number 1332.4500.42

Ports
2 ports
Frequency
10 MHz to 43.5 GHz
Connectors
2.92 mm(m)
R&S®ZNA43

R&S®ZNA43

Order number 1332.4500.43

Ports
2 ports
Frequency
10 MHz to 43.5 GHz
Connectors
2.4 mm(m)
R&S®ZNA43

R&S®ZNA43

Order number 1332.4500.44

Ports
4 ports
Frequency
10 MHz to 43.5 GHz
Connectors
2.92 mm(m)
R&S®ZNA43

R&S®ZNA43

Order number 1332.4500.45

Ports
4 ports
Frequency
10 MHz to 43.5 GHz
Connectors
2.4 mm(m)
R&S®ZNA50

R&S®ZNA50

Order number 1332.4500.52

Ports
2 ports
Frequency
10 MHz to 50 GHz
Connectors
2.4 mm(m)
R&S®ZNA50

R&S®ZNA50

Order number 1332.4500.54

Ports
4 ports
Frequency
10 MHz to 50 GHz
Connectors
2.4 mm(m)
R&S®ZNA67

R&S®ZNA67

Order number 1332.4500.62

Ports
2 ports
Frequency
10 MHz to 67 GHz
Connectors
1.85 mm(m)
R&S®ZNA67

R&S®ZNA67

Order number 1332.4500.64

Ports
4 ports
Frequency
10 MHz to 67 GHz
Connectors
1.85 mm(m)

R&S®ZNA67EXT

Order number 1352.1888.02

Ports
2 ports
Frequency
10 MHz to 110 GHz
Connectors
1.0 mm(m)

R&S®ZNA67EXT

Order number 1352.1888.03

Ports
2 ports
Frequency
10 MHz to 110 GHz
Connectors
1.0 mm(m)
R&S®ZNA67EXT

R&S®ZNA67EXT

Order number 1352.1888.04

Ports
4 ports
Frequency
10 MHz to 110 GHz
Connectors
1.0 mm(m)

R&S®ZNA67EXT

Order number 1352.1888.05

Ports
2 ports
Frequency
10 MHz to 110 GHz
Connectors
1.0 mm(m)

R&S®ZNA67EXT

Order number 1352.1888.06

Ports
2 ports
Frequency
10 MHz to 110 GHz
Connectors
1.0 mm(m)
R&S®ZNA67EXT

R&S®ZNA67EXT

Order number 1352.1888.07

Ports
4 ports
Frequency
10 MHz to 110 GHz
Connectors
1.0 mm(m)

Available options

Direct channel and signal path access
Product
Description
R&S®ZNA-B26

Order number 1332.4598.02

Description

Direct IF access

R&S®ZNA26-B16

Order number 1332.4581.22

Description

Direct source and receiver access

for R&S®ZNA26 (2 ports)

R&S®ZNA26-B16

Order number 1332.4581.24

Description

Direct source and receiver access

for R&S®ZNA26 (4 ports)

R&S®ZNA26-B161

Order number 1332.4823.51

Description

Direct source monitor access, port 1

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-B163

Order number 1332.4823.53

Description

Direct source monitor access, port 1+3

for R&S®ZNA26 (HW opt.)

R&S®ZNA43-B16

Order number 1332.4581.42

Description

Direct source and receiver access

for R&S®ZNA43 (2 ports)

R&S®ZNA43-B16

Order number 1332.4581.44

Description

Direct source and receiver access

for R&S®ZNA43 (4 ports)

R&S®ZNA43-B161

Order number 1332.4830.51

Description

Direct source monitor access, port 1

for R&S®ZNA43 (HW opt.)

R&S®ZNA43-B163

Order number 1332.4830.53

Description

Direct source monitor access, port 1+3

for R&S®ZNA43 (HW opt.)

R&S®ZNA50-B16

Order number 1332.6278.52

Description

Direct source and receiver accesss

for R&S®ZNA50 (2 ports)

R&S®ZNA50-B16

Order number 1332.6278.54

Description

Direct source and receiver accesss

for R&S®ZNA50 (4 ports)

R&S®ZNA67-B16

Order number 1332.6278.62

Description

Direct source and receiver accesss

for R&S®ZNA67 (2 ports)

R&S®ZNA67-B16

Order number 1332.6278.64

Description

Direct source and receiver accesss

for R&S®ZNA67 (4 ports)

R&S®ZNA50-B161

Order number 1332.5107.51

Description

ZNA50-B161 SRC MONITOR P1

Direct source monitor access for port 1
before the source step attenuator
for R&S®ZNA50
 

R&S®ZNA50-B163

Order number 1332.5107.53

Description

ZNA50-B163 SRC MONITOR ACCESS P1+P3

Direct source monitor access for port 1 and port 3
before the source step attenuator
for R&S®ZNA50 (4 ports)
 

R&S®ZNA67-B161

Order number 1332.5113.51

Description

ZNA67-B161 SRC MONITOR ACCESS P1

Direct source monitor access for port 1
before the source step attenuator
for R&S®ZNA67

R&S®ZNA67-B163

Order number 1332.5113.53

Description

ZNA67-B163 SRC MONITOR ACCESS P1+P3

Direct source monitor access for port 1 and port 3
before the source step attenuator
for R&S®ZNA67 (4 ports)

Source step attenuators
Product
Description
R&S®ZNA26-B21

Order number 1332.4630.21

Description

Source step attenuator for port 1

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA26-B22

Order number 1332.4630.22

Description

Source step attenuator for port 2

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA26-B23

Order number 1332.4630.23

Description

Source step attenuator for port 3

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA26-B24

Order number 1332.4630.24

Description

Source step attenuator for port 4

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA43-B21

Order number 1332.4646.21

Description

Source step attenuator for port 1

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

R&S®ZNA43-B22

Order number 1332.4646.22

Description

Source step attenuator for port 2

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

R&S®ZNA43-B23

Order number 1332.4646.23

Description

Source step attenuator for port 3

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

R&S®ZNA43-B24

Order number 1332.4646.24

Description

Source step attenuator for port 4

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

R&S®ZNA50-B21

Order number 1332.5188.21

Description

Source step attenuator for port 1

mechanical, 50dB in 10dB steps, for R&S®ZNA50

R&S®ZNA50-B22

Order number 1332.5188.22

Description

Source step attenuator for port 2

mechanical, 50dB in 10dB steps, for R&S®ZNA50

R&S®ZNA50-B23

Order number 1332.5188.23

Description

Source step attenuator for port 3

mechanical, 50dB in 10dB steps, for R&S®ZNA50

R&S®ZNA50-B24

Order number 1332.5188.24

Description

Source step attenuator for port 4

mechanical, 50dB in 10dB steps, for R&S®ZNA50

R&S®ZNA67-B21

Order number 1332.5194.21

Description

Source step attenuator for port 1

mechanical, 50dB in 10dB steps, for R&S®ZNA67

R&S®ZNA67-B22

Order number 1332.5194.22

Description

Source step attenuator for port 2

mechanical, 50dB in 10dB steps, for R&S®ZNA67

R&S®ZNA67-B23

Order number 1332.5194.23

Description

Source step attenuator for port 3

mechanical, 50dB in 10dB steps, for R&S®ZNA67

R&S®ZNA67-B24

Order number 1332.5194.24

Description

Source step attenuator for port 4

mechanical, 50dB in 10dB steps, for R&S®ZNA67

R&S®ZNA67-B21

Order number 1332.5013.21

Description

ZNA67-B21 GEN. STEP ATTENUATOR P1

Source step attenuator for port 1,
mechanical, 50 dB in 10 dB steps
for R&S®ZNA67

R&S®ZNA67-B22

Order number 1332.5013.22

Description

ZNA67-B22 GEN. STEP ATTENUATOR P2

Source step attenuator for port 2,
mechanical, 50 dB in 10 dB steps
for R&S®ZNA67

R&S®ZNA67-B23

Order number 1332.5013.23

Description

ZNA67-B23 GEN. STEP ATTENUATOR P3

Source step attenuator for port 3,
mechanical, 50 dB in 10 dB steps
for R&S®ZNA67

R&S®ZNA67-B24

Order number 1332.5013.24

Description

ZNA67-B24 GEN. STEP ATTENUATOR P4

Source step attenuator for port 4,
mechanical, 50 dB in 10 dB steps
for R&S®ZNA67

R&S®ZNA50-B21

Order number 1332.5007.21

Description

ZNA50-B21 GEN. STEP ATTENUATOR P1

Generator step attenuator port 1,
mechanical, 70 dB in steps of 10 dB
for R&S®ZNA50

R&S®ZNA50-B22

Order number 1332.5007.22

Description

ZNA50-B22 GEN. STEP ATTENUATOR P2

Generator step attenuator port 2,
mechanical, 70 dB in steps of 10 dB
for R&S®ZNA50

 

R&S®ZNA50-B23

Order number 1332.5007.23

Description

ZNA50-B23 GEN. STEP ATTENUATOR P3

Generator step attenuator port 3,
mechanical, 70 dB in steps of 10 dB
for R&S®ZNA50

R&S®ZNA50-B24

Order number 1332.5007.24

Description

ZNA50-B24 GEN. STEP ATTENUATOR P4

Generator step attenuator port 4,
mechanical, 70 dB in steps of 10 dB
for R&S®ZNA50
 

Receiver step attenuators
Product
Description
R&S®ZNA26-B31

Order number 1332.4700.31

Description

Receiver step attenuator for port 1

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26

R&S®ZNA26-B32

Order number 1332.4700.32

Description

Receiver step attenuator for port 2

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26

R&S®ZNA26-B33

Order number 1332.4700.33

Description

Receiver step attenuator for port 3

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26 (4 ports)

R&S®ZNA26-B34

Order number 1332.4700.34

Description

Receiver step attenuator for port 4

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26 (4 ports)

R&S®ZNA43-B31

Order number 1332.4717.31

Description

Receiver step attenuator for port 1

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43

R&S®ZNA43-B32

Order number 1332.4717.32

Description

Receiver step attenuator for port 2

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43

R&S®ZNA43-B33

Order number 1332.4717.33

Description

Receiver step attenuator for port 3

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43 (4 ports)

R&S®ZNA43-B34

Order number 1332.4717.34

Description

Receiver step attenuator for port 4

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43 (4 ports)

R&S®ZNA50-B31

Order number 1332.5165.31

Description

Receiver step attenuator for port 1

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA50-B32

Order number 1332.5165.32

Description

Receiver step attenuator for port 2

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA50-B33

Order number 1332.5165.33

Description

Receiver step attenuator for port 3

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA50-B34

Order number 1332.5165.34

Description

Receiver step attenuator for port 4

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA67-B31

Order number 1332.5171.31

Description

Receiver step attenuator for port 1

mechanical, 35dB in 5dB steps, for R&S®ZNA67

R&S®ZNA67-B32

Order number 1332.5171.32

Description

Receiver step attenuator for port 2

mechanical, 35dB in 5dB steps, for R&S®ZNA67

R&S®ZNA67-B33

Order number 1332.5171.33

Description

Receiver step attenuator for port 3

mechanical, 35dB in 5dB steps, for R&S®ZNA67

R&S®ZNA67-B34

Order number 1332.5171.34

Description

Receiver step attenuator for port 4

mechanical, 35dB in 5dB steps, for R&S®ZNA67

R&S®ZNA50-B31

Order number 1332.5020.31

Description

Receiver step attenuator for port 1

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA50-B32

Order number 1332.5020.32

Description

Receiver step attenuator for port 2

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA50-B33

Order number 1332.5020.33

Description

Receiver step attenuator for port 3

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA50-B34

Order number 1332.5020.34

Description

Receiver step attenuator for port 4

mechanical, 35dB in 5dB steps, for R&S®ZNA50

R&S®ZNA67-B31

Order number 1332.5036.31

Description

ZNA67-B31 REC. STEP ATTENUATOR P1

Receiver step attenuator for port 1,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA67

R&S®ZNA67-B32

Order number 1332.5036.32

Description

ZNA67-B32 REC. STEP ATTENUATOR P2

Receiver step attenuator for port 2,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA67

R&S®ZNA67-B33

Order number 1332.5036.33

Description

ZNA67-B33 REC. STEP ATTENUATOR P3

Receiver step attenuator for port 3,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA67

R&S®ZNA67-B34

Order number 1332.5036.34

Description

ZNA67-B34 REC. STEP ATTENUATOR P4

Receiver step attenuator for port 4,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA67

Internal sources
Product
Description
R&S®ZNA-B5

Order number 1332.4675.02

Description

2nd internal LO source

for R&S®ZNA (4 ports)

R&S®ZNA-B8

Order number 1332.4652.02

Description

mmWave converter LO

10 MHz to 26.5 GHz

R&S®ZNA26-B3

Order number 1332.4523.02

Description

3rd and 4th internal source

for R&S®ZNA26 (4 ports)

R&S®ZNA43-B3

Order number 1332.4617.02

Description

3rd and 4th internal source

for R&S®ZNA43 (4 ports)

R&S®ZNA50-B3

Order number 1332.4981.02

Description

3rd and 4th internal source

for R&S®ZNA50 (4 ports)

R&S®ZNA67-B3

Order number 1332.4998.02

Description

3rd and 4th internal source

for R&S®ZNA67 (4 ports)

R&S®ZNA26-B52

Order number 1332.6503.02

Description

2nd LO+RF source for R&S®ZNA26 (2 ports) (HW opt)

2nd RF and 2nd internal LO source,  for R&S®ZNA26 (2 port models).  (External access to the LO src (up to 26.5 GHz) requires option R&S®ZNA-B8). (Hardware option)

R&S®ZNA43-B52

Order number 1332.6510.02

Description

2nd LO+RF source for R&S®ZNA43 (2 ports) (HW opt)

2nd RF and 2nd internal LO source,  for R&S®ZNA43 (2 port models).  (External access to the LO src (up to 26.5 GHz) requires option R&S®ZNA-B8). (Hardware option)

R&S®ZNA50-B52

Order number 1332.6526.02

Description

ZNA50-B52 2ND SRC+INT LO (2P ZNA)

2nd RF and 2nd internal LO source,
for R&S®ZNA50 (2 port models).

R&S®ZNA67-B52

Order number 1332.6532.02

Description

ZNA67-B52 2ND SRC+INT LO (2P ZNA)

2nd RF and 2nd internal LO source,
for R&S®ZNA67 (2 port models)

Signal conditioning
Product
Description
R&S®ZNA26-B41

Order number 1332.4775.41

Description

Internal pulse modulators for port 1

for R&S®ZNA26

R&S®ZNA26-B42

Order number 1332.4775.42

Description

Internal pulse modulators for port 2

for R&S®ZNA26

R&S®ZNA26-B43

Order number 1332.4775.43

Description

Internal pulse modulators for port 3

for R&S®ZNA26 (4 ports)

R&S®ZNA26-B44

Order number 1332.4775.44

Description

Internal pulse modulators for port 4

for R&S®ZNA26 (4 ports)

R&S®ZNA26-B213

Order number 1332.4846.13

Description

Internal combiner, port 1 and port 3

for R&S®ZNA26 (HW opt)

R&S®ZNA26-B302

Order number 1332.4752.12

Description

Low-noise preamplifier at receiver, port 2, for R&S®ZNA26

R&S®ZNA26-B501

Order number 1332.5220.11

Description

Low-power spurious reduction, port 1, for R&S®ZNA26

R&S®ZNA43-B41

Order number 1332.4781.41

Description

Internal pulse modulators for port 1

for R&S®ZNA43

R&S®ZNA43-B42

Order number 1332.4781.42

Description

Internal pulse modulators for port 2

for R&S®ZNA43

R&S®ZNA43-B43

Order number 1332.4781.43

Description

Internal pulse modulators for port 3

for R&S®ZNA43 (4 ports)

R&S®ZNA43-B44

Order number 1332.4781.44

Description

Internal pulse modulators for port 4

for R&S®ZNA43 (4 ports)

R&S®ZNA43-B213

Order number 1332.4869.13

Description

Internal combiner, port 1 and port 3

for R&S®ZNA43 (HW opt)

R&S®ZNA43-B501

Order number 1332.5236.11

Description

Low-power spurious reduction, port 1, for R&S®ZNA43

R&S®ZNA50-B41

Order number 1332.5088.41

Description

Internal Pulse Modulator for port 1

for R&S®ZNA50

R&S®ZNA50-B42

Order number 1332.5088.42

Description

Internal Pulse Modulator for port 2

for R&S®ZNA50

R&S®ZNA50-B43

Order number 1332.5088.43

Description

Internal Pulse Modulator for port 3

for R&S®ZNA50

R&S®ZNA50-B44

Order number 1332.5088.44

Description

Internal Pulse Modulator for port 4

for R&S®ZNA50

R&S®ZNA67-B41

Order number 1332.5094.41

Description

Internal Pulse Modulator for port 1

for R&S®ZNA67

R&S®ZNA67-B42

Order number 1332.5094.42

Description

Internal Pulse Modulator for port 2

for R&S®ZNA67

R&S®ZNA67-B43

Order number 1332.5094.43

Description

Internal Pulse Modulator for port 3

for R&S®ZNA67

R&S®ZNA67-B44

Order number 1332.5094.44

Description

Internal Pulse Modulator for port 4

for R&S®ZNA67

R&S®ZNA43-B302

Order number 1332.4769.22

Description

Low noise pre-amplifier receiver port 2 (R&S®ZNA43)

Low noise pre-amplifier at receiver port 2, up to 43.5 GHz for R&S®ZNA43. (requires R&S®ZNA43-B16, R&S®ZNA43-B32)

R&S®ZNA26-B212

Order number 1332.5265.02

Description

Internal combiner for the R&S®ZNA26 model (*.22) with 2 test ports (hardware option)

Provides a two tone signal at Port 1, combining the internal sources of Port 1 and Port 2 (requires the R&S®ZNA26-B52, R&S®ZNA26-B21)

R&S®ZNA43-B212

Order number 1332.5271.02

Description

Internal combiner for the R&S®ZNA43 models (*.42, *.43) with 2 test ports (hardware opt)

Provides a two tone signal at Port 1, combining the internal sources of Port 1 and Port 2 (requires the R&S®ZNA43-B52, R&S®ZNA43-B21)

R&S®ZNA50-B212

Order number 1332.5288.02

Description

ZNA50-B212 INTERNAL COMBINER P1-P2

Internal combiner
for R&S®ZNA50 (2 ports).
Provides a two-tone signal at Port 1

R&S®ZNA50-B213

Order number 1332.5042.13

Description

ZNA50-B213 INTERNER COMBINER P1-P3

Internal combiner
for port 1 and port 3
for R&S®ZNA50 (4 ports)
Provides a two-tone signal at Port 1

 

R&S®ZNA50-B302

Order number 1332.4798.12

Description

R&S®ZNA50-B302 LOW NOISE AMP. REC P2

Low noise preamplifier at receiver
port 2, for R&S®ZNA50.;
(requires R&S®ZNA50-B16, R&S®ZNA50-B32);
export restricted

R&S®ZNA50-B312

Order number 1332.5659.02

Description

R&S®ZNA50-B312 LOW NOISE AMP. REC P2

Low noise preamplifier at receiver
port 2, for R&S®ZNA50.;
combination with R&S®ZNA-K1 not possible
no export restriction

R&S®ZNA50-B501

Order number 1332.5242.11

Description

R&S®ZNA50-B501 LOW POWER SPUR REDUCTION

Spur magnitude reduction for enhanced
spectral purity with low RF output
power, for Port 1
export restricted

R&S®ZNA50-B511

Order number 1332.5671.02

Description

ZNA50-B511 LOW POWER SPUR REDUCTION

Spur magnitude reduction for enhanced
spectral purity with low RF output
power, for Port 1
no export restriction

R&S®ZNA67-B212

Order number 1332.5294.02

Description

ZNA67-B212 INTERNER COMBINER P1-P2

Internal combiner
for R&S®ZNA67 (2 ports).
Provides a two-tone signal at Port 1

R&S®ZNA67-B213

Order number 1332.5065.13

Description

ZNA67-B213 INTERNAL COMBINER P1-P3

Internal combiner
for port 1 and port 3
for R&S®ZNA67 (4 ports)
Provides a two-tone signal at Port 1

R&S®ZNA67-B302

Order number 1332.4817.12

Description

ZNA67-B302 LOW NOISE AMP. REC P2

Low noise pre-amplifier at receiver
port 2, for R&S®ZNA67

R&S®ZNA67-B312

Order number 1332.5665.02

Description

ZNA67-B312 LOW NOISE AMP. REC P2

Low noise pre-amplifier at receiver
port 2, for R&S®ZNA67

R&S®ZNA67-B501

Order number 1332.5259.11

Description

ZNA67-B501 LOW POWER SPUR REDUCTION

Spur magnitude reduction for enhanced
spectral purity with low RF output
power, for Port 1

R&S®ZNA67-B511

Order number 1332.5688.02

Description

ZNA67-B511 LOW POWER SPUR REDUCTION

Spur magnitude reduction for enhanced
spectral purity with low RF output
power, for Port 1

Other
Product
Description
R&S®ZNA-B4

Order number 1332.4530.02

Description

Precision frequency reference

for R&S®ZNA

R&S®ZNA-B7

Order number 1332.4546.02

Description

Memory extension

for multiple receiver pulse profile measurement

R&S®ZNA-B19

Order number 1332.4600.02

Description

Additional removable harddisc

for R&S®ZNA

R&S®ZNA-B91

Order number 1332.4800.02

Description

Trigger and control I/O board

for R&S®ZNA

R&S®ZZA-KN6

Order number 1175.3056.00

Description

19" adapter BW2010, cabinet 6HU 1/1

R&S®ZNA26-Z9

Order number 1332.4730.26

Description

Cable Set for ZNA-K9 for R&S®ZNA26 (4 ports)

Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

R&S®ZNA26-U16

Order number 1332.6410.22

Description

Direct source and receiver access

for R&S®ZNA26 (2 ports) (HW opt.)

R&S®ZNA26-U16

Order number 1332.6410.24

Description

Direct source and receiver access

for R&S®ZNA26 (4 ports) (HW opt.)

R&S®ZNA26-U21

Order number 1332.6426.21

Description

Source step att., port 1, 70 dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U22

Order number 1332.6426.22

Description

Source step att., port 2, 70 dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U23

Order number 1332.6426.23

Description

Source step att., port 3, 70 dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U24

Order number 1332.6426.24

Description

Source step att., port 4, 70 dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U31

Order number 1332.6461.31

Description

Receiver step att., port 1, 35 dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U32

Order number 1332.6461.32

Description

Receiver step att., port 2, 35 dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U33

Order number 1332.6461.33

Description

Receiver step att., port 3, 35dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U34

Order number 1332.6461.34

Description

Receiver step att., port 4, 35dB

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U161

Order number 1332.6184.51

Description

Direct source monitor access, port 1

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-U163

Order number 1332.6184.53

Description

Direct source monitor access, port 1+3

for R&S®ZNA26 (HW opt.)

R&S®ZNA43-Z9

Order number 1332.4730.43

Description

Cable Set for ZNA-K9 for R&S®ZNA43 (4 ports), 2.92mm(m) connectors

Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

R&S®ZNA43-Z9

Order number 1332.4730.44

Description

Cable Set for ZNA-K9 for R&S®ZNA43 (4 ports), 2.4mm(m) connectors

Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

R&S®ZNA43-U16

Order number 1332.6410.42

Description

Direct source/receiver access

for R&S®ZNA43 (2 ports) (HW opt.)

R&S®ZNA43-U16

Order number 1332.6410.44

Description

Direct source/receiver access

for R&S®ZNA43 (4 ports) (HW opt.)

R&S®ZNA43-U21

Order number 1332.6432.21

Description

Source step att., port 1, 70 dB

for R&S®ZNA43 (HW opt.) Upgrade

R&S®ZNA43-U22

Order number 1332.6432.22

Description

Source step att., port 2, 70 dB

for R&S®ZNA43 (HW opt.) Upgrade

R&S®ZNA43-U23

Order number 1332.6432.23

Description

Source step att., port 3, 70 dB

for R&S®ZNA43 (HW opt.) Upgrade

R&S®ZNA43-U24

Order number 1332.6432.24

Description

Source step att., port 4, 70 dB

for R&S®ZNA43 (HW opt.) Upgrade

R&S®ZNA43-U31

Order number 1332.6478.31

Description

Receiver step att., port 1, 35 dB

for &S®ZNA43, (HW opt.) Upgrade

R&S®ZNA43-U32

Order number 1332.6478.32

Description

Receiver step att., port 2, 35 dB

for &S®ZNA43,  (HW opt.) Upgrade

R&S®ZNA43-U33

Order number 1332.6478.33

Description

Receiver step att., port 3, 35 dB

for R&S®ZNA43, (HW opt.) Upgrade

R&S®ZNA43-U34

Order number 1332.6478.34

Description

Receiver step att., port 4, 35 dB

for R&S®ZNA43, (HW opt.) Upgrade

R&S®ZNA43-U161

Order number 1332.6190.51

Description

Direct source monitor access, port 1

for R&S®ZNA43 (HW opt.)

R&S®ZNA43-U163

Order number 1332.6190.53

Description

Direct source monitor access, port 1+3

for R&S®ZNA43 (HW opt.)

R&S®ZNA50-Z9

Order number 1332.4730.50

Description

Cable Set for ZNA-K9 for R&S®ZNA50 (4ports)

Combines signals from Port 1 and Port 3 to a two-tone signal at Port 1 (for IM and ZNA-K9 embedded LO GD measurements) for ZNA50, 4-port (2.4mm - 2.4mm)

R&S®ZNA67-Z9

Order number 1332.4730.67

Description

Cable Set for ZNA-K9 for R&S ZNA67 (4ports)

Combines signals from Port 1 and Port 3 to a two-tone signal at Port 1 (for IM and ZNA-K9 embedded LO GD measurements) for ZNA67, 4-port (1.85mm - 1.85mm)

R&S®ZNA43-U21

Order number 1332.5307.21

Description

Source step att., port 1, 70 dB
 

for R&S®ZNA43 with 2.4mm connector (HW opt.)   Upgrade

R&S®ZNA43-U22

Order number 1332.5307.22

Description

Source step att., port 2, 70 dB

 

for R&S®ZNA43 with 2.4mm connector (HW opt.) Upgrade 

R&S®ZNA43-U23

Order number 1332.5307.23

Description

Source step att., port 3, 70 dB
 

for R&S®ZNA43 with 2.4mm connector (HW opt.)   Upgrade  

R&S®ZNA43-U24

Order number 1332.5307.24

Description

Source step att., port 4, 70 dB
 

for R&S®ZNA43 with 2.4mm connector (HW opt.)   Upgrade  

R&S®ZNA43-U31

Order number 1332.5313.31

Description

Receiver step att., port 1, 35 dB
 

for R&S®ZNA43 with 2.4mm connector (HW opt.)  Upgrade  

R&S®ZNA43-U32

Order number 1332.5313.32

Description

Receiver step att., port 2, 35 dB
 

for R&S®ZNA43 with 2.4mm connector (HW opt.)  Upgrade  

R&S®ZNA43-U33

Order number 1332.5313.33

Description

Receiver step att., port 3, 35 dB
 

for R&S®ZNA43 with 2.4mm connector (HW opt.)  Upgrade  

R&S®ZNA43-U34

Order number 1332.5313.34

Description

Receiver step att., port 4, 35 dB
 

for R&S®ZNA43 with 2.4mm connector (HW opt.)  Upgrade  

R&S®ZNA50-U161

Order number 1332.6203.51

Description

ZNA50-U161 SRC MONITOR ACCESS P1

Direct source monitor access
for port 1 before the source
step attenuator, for R&S®ZNA50
Upgrade option for ZNA50 2-port (only)

R&S®ZNA50-U163

Order number 1332.6203.53

Description

ZNA50-U163 SRC MONITOR ACCESS P1+P3

Direct source monitor access
for port 1 & port 3 before the source
step attenuator, for R&S®ZNA50.
Upgrade option for ZNA50 4-port

R&S®ZNA50-U16

Order number 1332.6410.52

Description

ZNA50-U16 DIRECT GEN/REC ACCESS 2P

Direct source and receiver access
for R&S®ZNA50 (2 ports), Upgrade
Option

R&S®ZNA50-U16

Order number 1332.6410.54

Description

ZNA50-U16 DIRECT GEN/REC ACCESS 4P

Direct source and receiver access
for R&S®ZNA50 (4 ports), Upgrade-
option

R&S®ZNA50-U21

Order number 1332.6449.21

Description

ZNA50-U21 GEN. STEP ATTENUATOR P1

Source step attenuator for port 1,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA50, Upgrade Option

R&S®ZNA50-U22

Order number 1332.6449.22

Description

GM ZNA50-U22 GEN. STEP ATTENUATOR P2

Source step attenuator for port 2,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA50, Upgrade-option

R&S®ZNA50-U23

Order number 1332.6449.23

Description

GM ZNA50-U23 GEN. STEP ATTENUATOR P3

Source step attenuator for port 3,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA50, Upgrade Option

R&S®ZNA50-U24

Order number 1332.6449.24

Description

ZNA50-U24 GEN. STEP ATTENUATOR P4

Source step attenuator for port 4,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA50, Upgrade-option

R&S®ZNA50-U31

Order number 1332.6484.31

Description

ZNA50-B31 REC. STEP ATTENUATOR P1

Receiver step attenuator for port 1,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA50
Upgrade Option

R&S®ZNA50-U32

Order number 1332.6484.32

Description

ZNA50-B32 REC. STEP ATTENUATOR P2

Receiver step attenuator for port 2,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA50
Upgrade Option
 

R&S®ZNA50-U33

Order number 1332.6484.33

Description

ZNA50-B33 REC. STEP ATTENUATOR P3

Receiver step attenuator for port 3,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA50

R&S®ZNA50-U34

Order number 1332.6484.34

Description

ZNA50-B34 REC. STEP ATTENUATOR P4

Receiver step attenuator for port 4,
mechanical, 35 dB in 5 dB steps
for R&S®ZNA50
Upgrade Option

R&S®ZNA67-U161

Order number 1332.6210.51

Description

ZNA67-U161 SRC MONITOR ACCESS P1

Direct source monitor access
for port 1 before the source
step attenuator, for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U163

Order number 1332.6210.53

Description

ZNA67-B163 SRC MONITOR ACCESS P1+P3

Direct source monitor access for port 1 and port 3
before the source step attenuator
for R&S®ZNA67 (4 ports)
Upgrade Option

R&S®ZNA67-U16

Order number 1332.6410.62

Description

ZNA67-U16 DIRECT GEN/REC ACCESS 2P

Direct source and receiver access
for R&S®ZNA67 (2 ports)
Upgrade Option

R&S®ZNA67-U16

Order number 1332.6410.64

Description

ZNA67-U16 DIRECT GEN/REC ACCESS 4P

Direct source and receiver access
for R&S®ZNA67 (4 ports)
Upgrade Option

R&S®ZNA67-U21

Order number 1332.6455.21

Description

ZNA67-U21 GEN. STEP ATTENUATOR P1

Source step attenuator for port 1,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U22

Order number 1332.6455.22

Description

ZNA67-U22 GEN. STEP ATTENUATOR P2

Source step attenuator for port 2,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U23

Order number 1332.6455.23

Description

ZNA67-U23 GEN. STEP ATTENUATOR P3

Source step attenuator for port 3,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U24

Order number 1332.6455.24

Description

ZNA67-U24 GEN. STEP ATTENUATOR P4

Source step attenuator for port 4,
mechanical, 70 dB in 10 dB steps,
for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U31

Order number 1332.6490.31

Description

ZNA67-U31 REC. STEP ATTENUATOR P1

Receiver step attenuator for port 1,
mechanical, 35 dB in 5 dB steps,
for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U32

Order number 1332.6490.32

Description

ZNA67-U32 REC. STEP ATTENUATOR P2

Receiver step attenuator for port 2,
mechanical, 35 dB in 5 dB steps,
for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U33

Order number 1332.6490.33

Description

ZNA67-U33 REC. STEP ATTENUATOR P3

Receiver step attenuator for port 3,
mechanical, 35 dB in 5 dB steps,
for R&S®ZNA67
Upgrade Option

R&S®ZNA67-U34

Order number 1332.6490.34

Description

ZNA67-U34 REC. STEP ATTENUATOR P4

Receiver step attenuator for port 4,
mechanical, 35 dB in 5 dB steps,
for R&S®ZNA67
Upgrade Option

Software options
Product
Description

Order number 1332.5320.02

Description

Spectrum analyzer mode

for R&S®ZNA

Order number 1332.5336.02

Description

Time domain analysis (TDR)

for R&S®ZNA

R&S®ZNA-K20

Order number 1332.4746.02

Description

Extended time domain analysis

incl. eye diagram, for R&S®ZNA

Order number 1332.5342.02

Description

Scalar mixer measurements and arbitrary frequency-converting measurements

for R&S®ZNA

R&S®ZNA-K5

Order number 1332.5359.02

Description

Vector corrected converter measurements for R&S®ZNA

(without reference mixer and phase reference), requires R&S®ZNA-K4

Order number 1332.5413.02

Description

Phase coherent source control

for R&S®ZNA

Order number 1332.5442.02

Description

True differential mode

for R&S®ZNA

Order number 1332.5371.02

Description

Measurements on pulsed signals:

Pulse configuration, pulse profile and pulse train measurement, requires R&S®ZNA-K17

R&S®ZNA-K17

Order number 1332.5459.02

Description

Increased IF bandwidth up to 30 MHz

for R&S®ZNA

Order number 1332.5388.02

Description

Converter Control Software

(for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx)

R&S®ZNA-K9

Order number 1332.5394.02

Description

Group delay measurements on frequency converters without LO access

for R&S®ZNA (4 ports strongly recommended), requires  R&S®ZNAxx-B16 and R&S®ZNA-K4, either with R&S®ZNA26/43/50/67-Z9 cable set or R&S®ZNA26/43-B213 Internal Combiner.

R&S®ZNA-K19

Order number 1332.5513.02

Description

mHz frequency resolution

for R&S®ZNA

Order number 1332.5465.02

Description

Noise figure measurement

for R&S®ZNA26/43

R&S®ZNA-K50

Order number 1332.5542.02

Description

Realtime measurement uncertainty analysis

Requires the Swiss Metrology Institute METAS Software: "VNA Tools" (free download from METAS website), for R&S®ZNA26, R&S®ZNA43

R&S®ZNA-K50P

Order number 1332.5594.02

Description

Realtime measurement uncertainty analysis

for R&S®ZNA. Including pre-installed Swiss Metrology Institute METAS Software: “VNA tools”

R&S®ZNA-K51

Order number 1332.5559.02

Description

Security write protection of internal harddisc

for R&S®ZNA

R&S®ZNA-K210

Order number 1339.3897.02

Description

EAZY De-embedding (EZD) based on IEEE 370

for R&S®ZNA

R&S®ZNA-K220

Order number 1339.3900.02

Description

In-Situ De-embedding (ISD) that covers IEEE 370

for R&S®ZNA

R&S®ZNA-K230

Order number 1339.3916.02

Description

Smart Fixture De-embedding (SFD)

for R&S®ZNA

R&S®ZNA-K231

Order number 1339.3922.02

Description

Delta-L 4.0 PCB characterization

for R&S®ZNA

R&S®ZNA-K980

Order number 1332.5607.02

Description

HUMS software option

Health and Utilization Monitoring Service for R&S®ZNA (software license)

R&S®ZNA-K28

Order number 1332.5613.02

Description

Continuous data recording (SL)

Continuous data acquisition: Data of periodically executed sweeps are recorded with equidistant time grid by means of a circular buffer. (software license)

R&S®ZN-ZTW torque wrenches
Product
Description
R&S®ZN-ZTW

Order number 1328.8534.10

Description

Torque Wrench, 0.45 Nm

for 1.0 mm connectors, 6 mm width across flats

R&S®ZN-ZTW

Order number 1328.8534.11

Description

Torque Wrench, 0.23 Nm coupling torque

for 1.0 mm connectors with 6 mm width across flats

R&S®ZN-ZTW

Order number 1328.8534.12

Description

Torque Wrench, 0.34 Nm

for 1.0 mm connectors, 6 mm width across flats

R&S®ZN-ZTW

Order number 1328.8534.19

Description

Torque Wrench, 0.9 Nm

R&S®ZN-ZTW

Order number 1328.8534.35

Description

Torque Wrench

Torque Wrench for 3.5/2.92/2.4/1.85 mm connectors with 8 mm width across flats, 0.9 Nm coupling torque 

R&S®ZN-ZTW

Order number 1328.8534.71

Description

Torque Wrench, 1.5 Nm

for type N connectors, 20 mm width across flats

Attenuators and limiters
Product
Description
R&S®DNF

Order number 0272.4010.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 3 dB, 2 W

R&S®DNF

Order number 0272.4110.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 6 dB, 2 W

R&S®DNF

Order number 0272.4210.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 10 dB, 1 W

R&S®DNF

Order number 0272.4310.50

Description

Attenuator

0 Hz to 12.4 GHz, m/f 20 dB, 1 W

R&S®RBU50

Order number 1073.8695.03

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Order number 1073.8695.06

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Order number 1073.8695.10

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Order number 1073.8695.20

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Order number 1073.8695.30

Description

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.03

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.06

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.10

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.20

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.30

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RDL50

Order number 1035.1700.52

Description

High-Power Attenuator, 50W

0 Hz to 6 GHz, 20 dB

R&S®ZN-B13

Order number 1303.7840.02

Description

50 Ohm broadband limiter

Terminations and matching pads
Product
Description
R&S®RNA

Order number 0272.4510.50

Description

Precision Termination, 75 Ω

1 W, DC to 3 GHz, N (m)

R&S®RNB

Order number 0272.4910.50

Description

Termination, 50 Ω

1 W, DC to 4 GHz, N (m)

R&S®RAU

Order number 0200.0019.55

Description

UHF Termination , 50 Ω

0 Hz to 2 GHz, 100 W, N (f)

R&S®RAD

Order number 0289.8966.00

Description

Feedthrough Termination, 50 Ω

0.5 W, DC to 1 GHz, BNC (m/f)

R&S®RAD50

Order number 0844.9352.02

Description

Feedthrough Termination, 50 Ω

2 W, DC to 500 MHz, BNC (m/f)

R&S®RAM

Order number 0358.5414.02

Description

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

R&S®RAZ

Order number 0358.5714.02

Description

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®RAZ

Order number 0358.5714.03

Description

Matching Pad 50/75 Ω, series resistor 25 Ω

0 Hz to 3.3 GHz

Bridges, power splitters and junction boxes
Product
Description
R&S®RVZ

Order number 0800.6612.52

Description

Power Splitter, 2x 50 Ω

0 Hz to 2.7 GHz

R&S®ZV-Z1227

Order number 1307.0886.02

Description

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZV-Z1228

Order number 3626.4937.02

Description

Pulsar 4-way power divider, 5 GHz to 27 GHz

5 GHz to 27 GHz

Adapters
Product
Description
R&S®ZV-Z1118

Order number 1314.5373.00

Description

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®ZV-Z1218

Order number 1314.5380.00

Description

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®WCA70

Order number 1324.5001.02

Description

Waveguide Coax Adapter, WR15 to 1.85 mm (male)
50 GHz to 75 GHz

R&S®WCA75

Order number 3626.1044.02

Description

Waveguide Coax Adapter, WR15 to 1 mm (f)

50 GHz to 75 GHz

R&S®WCA75

Order number 3626.1044.03

Description

Waveguide Coax Adapter, WR15 to 1 mm (m)

50 GHz to 75 GHz

R&S®WCA90

Order number 3626.1050.02

Description

Waveguide Coax Adapter, WR12 to 1 mm (f)

60 GHz to 90 GHz

R&S®WCA90

Order number 3626.1050.03

Description

Waveguide Coax Adapter, WR12 to 1 mm (m)

60 GHz to 90 GHz

R&S®WCA110

Order number 3626.1067.02

Description

Waveguide Coax Adapter, WR10 to 1 mm (f)

75 GHz to 110 GHz

R&S®WCA110

Order number 3626.1067.03

Description

Waveguide Coax Adapter, WR10 to 1 mm (m)

75 GHz to 110 GHz

Application videos

Making pulsed measurements with a vector network analyzer - chapter 1

In this video we Introduce the basics of an RF pulse, some of the parameters associated around the pulse and how it looks in the frequency domain.

10-Aug-2022

Making pulsed measurements with a vector network analyzer - chapter 2

In this video we introduce the concept behind making pulse measurements using the average (or narrow band) pulse technique and it’s limitations with respect to the duty cycle.

09-Aug-2022

Making pulsed measurements with a vector network analyzer - chapter 3

In this video we see how the Point-in-pulse (or wideband) measurement technique overcomes the limitations of the average technique and consider some of the hardware requirements to perform the measurement successfully.

08-Aug-2022

Making pulsed measurements with a vector network analyzer - chapter 4

In this final video we look at a special mode of measurements where the ZNA network analyzer can be used to analyze the pulse in time to study in much higher resolution what is happening during the “on time” of the RF pulse.

07-Aug-2022

Vector receiver load-pull measurements

The combination of Maury Microwave Tuners plus IV CAD software together with the R&S®ZNA vector network analyzer makes vector receiver load-pull measurements easy.

20-Jan-2021

#ThinkSix – OTA measurements for sub-THz communication in D-band

This video demonstrates the R&S®ATS1000 antenna test system from Rohde & Schwarz, now supporting frequencies up to 170 GHz.

10-Nov-2020

Signal Integrity Measurements

In combination with the time domain option R&S®ZNA-K2 and the extended time domain option R&S®ZNA-K20, the R&S®ZNA VNA offers a variety of signal integrity measurements.

21-May-2019

Group Delay Measurements on Mixers without LO access

This video presents how to perform measurements on frequency converting devices that have an embedded LO with an R&S®ZNA.

07-Jan-2019

Product videos

ZNA-K50 Real Time S-Parameter Measurement Uncertainty

Short summary of how the R&S®ZNA using the power of VNA Tools by METAS, the Swiss Federal Institute of Metrology, can help benefit engineers to make traceable S-parameter measurements.

10-Nov-2022

Demonstration of ZNA-K50 Real Time Uncertainty Calculation

Practical steps that engineers must perform to calibrate and run a verification test on the R&S®ZNA, measure traceable S-parameters on a device under test (DUT) and include traceable measurement uncertainties along with the S-parameters.

10-Nov-2022

De-embedding and measuring a PCIe5 connector with R&S®VNA

By reference to settings and measurements with a vector network analyzer R&S®ZNA we are demonstrating the de-embedding process of a PCIe5 connector integrated in a test fixture.

27-Mar-2022

Integrated Deembedding Software

For maximum accuracy in characterizing various components with fixtures, the R&S®ZNB has several industry standard de-embedding tools integrated in the R&S®ZNB Firmware

07-May-2021

Multi-Touch operation concept

The multi-touch capability of the R&S®ZNB ensures a smooth and easy operation of the instrument.

07-May-2021

Unique DUT centric operation

The R&S®ZNB offers a unique DUT-centric operation concept. This puts the DUT with its characteristics in the middle and helps you in setting up the measurement.

07-May-2021

Diverse measurement options

The R&S®ZNB vector network analyzer features a diverse number of measurement options.

07-May-2021

Solid performance for general purpose applications

The R&S®ZNB vector network analyzer offers solid RF performance for your everyday needs.

07-May-2021

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.